What’s the problems when operating table CNC plasma cutting machine?

table plasma cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/

1. Operator incorrect operation of table CNC plasma cutting machine.Incorrect operation will cause CNC plasma cutting machine to crash or wander.When plasma cutting machine cutting, please don’t press other button.
2. Table CNC plasma cutting machine system is not stable.Some CNC plasma cutting machine manufacturer reduce the cost without the technical support. So plasma cutting machine system is in poor quality.
3. The interference is very strong outside table CNC plasma cutting machine factory.A lot of equipment will produce a large number of electromagnetic pulse interference in CNC table plasma cutting machine factory.Such as a variety of welding machine, CNC plasma cutting machine.The interference directly into table plasma cutting machine system.So it affect CNC table plasma cutting machine CNC cutting system.CNC cutting machine must be placed away from various interference sources more than 10m.
4. Table CNC plasma cutting machine system anti-interference ability is poor.CNC plasma cutting machine should keep away from other cutting system if it’s anti-interference ability is poor.

SteelTailor LegendB5II table CNC plasma cutting machine is an powerful table plasma cutting machine.

https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/

What should you do to control table CNC plasma cutting machine pollution?

table plasma cutting machine

This article is from SteelTailor blog:https://www.steeltailor.com/blog/control-table-cnc-plasma-cutting-machine-pollution/

Table CNC plasma cutting machine will produce noise,smoke,arc and metal vapor.We should control CNC plasma cutting machine pollution to our daily life.

Table CNC plasma cutting machine should be equipped with exhaust system to exhaust gas out of workplace.If the exhaust gas still pollute environment seriously. CNC table plasma cutting machine should be equipment with smoke and dust transition equipment.

Table CNC plasma cutting machine water surface cutting and underwater cutting inhibit environmental pollution effectively.

CNC table plasma cutting machine water surface cutting need water tank.CNC plasma cutting table is composed of a plurality of arranged steeoidal steel members, which are supported on the horizontal plane by these stepped steel members .When table plasma cutting machine cutting, plasma cutting machine plasma arc is surrounded by water curtains.The In order to maintain a continuous water curtain, you need a circulating pump to remove water from the tank and then into CNC plasma cutting machine torch.This water curtain greatly controls the noise, dust, arc , metal vapor and other pollutants made by CNC cutting machine. This method requires a water flow of 55 to 75 L / min.

CNC table plasma cutting machine underwater cutting is put the material under water about 75mm. Plasma cutting table on which the workpiece is placed consists of a pointed steel member.The purpose of selecting a pointed-shaped steel member is to enable the cutting table to have sufficient capacity to hold chips and slag.

When Table CNC plasma cutting machine cutting ,first use a stable compressed air to blow away the water around the nozzle.Then ignite CNC plasma cutting machine plasma arc. Keep the depth of the workpiece submerged under the water. Should prepared a set of water control system.Then add a water pump and water tank to keep the later level.

SteelTailor LegendB5II CNC table plasma cutting machine is an powerful CNC plasma cutting machine.

https://www.steeltailor.com/blog/yeahlegendb5ii-cnc-table-cutting-and-marking-machine/